| AC Input |
| Nominal Input Voltage |
120V Model: 110V-120V (single-phase)
230V Model: 208V-250V (single-phase) |
| Input Frequency |
50 or 60 Hz +/-5% (+/-10% optional)
Specified at time of order |
| Input Voltage Range |
+/-25% of 115V or 230V (without using battery)
120V Model: 86V - 144V
230V Model: 173V - 288V |
|
| AC Output |
| UPS (inverter) operation |
On-line, Sine-Wave, PWM UPS |
| Output Voltage (+/-5% adjustable) |
120V Model: 110/115/120V
230V Model: 208/220/230/240/250V*** |
| Output Frequency |
50 or 60 Hz +/- 0.5% |
| True Sine Wave Output |
<3% Total Harmonic Distortion (THD) |
| Automatic Voltage Regulation |
+/-1% |
| Overload Capacity |
125-150% for 20 secs; 150% for 10 cycles
(Crest factor 3:1) |
| Output Voltage Transient Response |
+/- 4% for 100% load change (+/-% within 2ms) |
| Efficiency |
>84% line, > 90% inverter |
|
| Battery/Charger |
| Intelligent Battery Management |
Checks for charger faults & low / weak battery |
| Recharge Time |
10 hours typical from total discharge |
|
| Uninterrupted Operation/Maintenance |
| Transfer Time for Power Failure |
0 ms transfer time (On-line UPS) |
| Bypass |
Uninterrupted transfer to bypass if fault occurs,
auto transfer back to UPS when fault corrected |
| Hot-Swappable Batteries |
Batteries can be replaced without powering off equipment |
| Lockable Casters |
For easy installation |
|
| UPS Diagnostics/Management |
| UPS/Battery Self-Tests |
Checks for battery, charger and UPS faults |
| Battey Diagnostic Lights/Alarms |
For battery on, low or needs replacing |
| Bar-Graph Light Meters |
For load size and battery charge |
| Fault Diagnostic Lights/Alarms |
For overload, overvoltage, UPS fault, etc., |
| RS-232 (Db-9) Communication Port |
For signaling battery on/low & UPS shutdown |
|
| Warranty/Environment |
| UPS and Battery Warranty |
1 YEAR+ |
| Environment |
0-95% Humidity, 0-40 Deg. C (32-104 Deg. F) |
| Audible Noise at 1m From Unit |
<55 dB (<60 dB for LSO 6.25, 7.5, 10.0) |
|
